Description
WPWDT — Universal Split, Input Upward | Size 40–250 | Ratio 1/5–1/60 | Multi-Position Mounting
Engineered for material handling and warehouse automation, the WPWDT from Ever-power Australia Worm Reducer Co., Ltd. delivers dependable speed reduction with rugged HT200 cast iron housing for heavy-duty industrial service. Trusted by OEMs and system integrators across 60+ countries.
📜 WPWDT Product Overview
The WPWDT is a precision-built worm gear speed reducer designed for reliable right-angle power transmission in demanding industrial environments. Featuring rugged HT200 cast iron housing for heavy-duty industrial service, this unit transforms high-speed motor rotation into controlled, high-torque output suitable for material handling and warehouse automation. The worm gear mechanism provides inherently smooth, low-vibration operation with significantly lower noise levels than spur or helical gear alternatives — typically below 65 dB(A) at rated load.
All gear components are manufactured under ISO 9001-certified quality management. The worm wheel is machined from wear-resistant bronze alloy, while the worm shaft undergoes carburizing and precision grinding to achieve a hardened tooth surface. This material combination ensures gradual, predictable wear characteristics rather than sudden failure, giving maintenance teams confidence in planning scheduled interventions.
✅ Key Features & Benefits
Ground worm shaft with Zi tooth profile ensures optimal contact geometry, reducing wear and maximizing transmission efficiency.
90° shaft arrangement saves space in tight machine envelopes compared to inline reducers of equivalent torque capacity.
A single gearbox covers a broad ratio spectrum, simplifying inventory management across multiple machine designs.
High-quality radial ball bearings support both shafts, providing excellent load capacity and minimizing axial play.
🔧 Technical Specifications
| Parameter | Value |
|---|---|
| Configuration | Universal Split, Input Upward |
| Size Range | 40–250 |
| Ratio Range | 1/5–1/60 |
| Housing Material | HT200 Cast Iron |
| Worm Wheel | ZCuSn10Pb1 Tin Bronze |
| Worm Shaft | 45# Steel, HRC 56-62 |
| Input Speed | 1,500 r/min |
| Protection | IP55 |
| Lubrication | Oil-bath |
| Mounting | A/B/C/D/E configurations |
| Ambient Temp | -10°C to +40°C |
| Paint | Standard green (RAL custom available) |
🏭 Application Industries
Pumps, fans, agitators, and small machine tools across multiple industries.
Stone cutting, brick molding, and concrete mixing equipment for construction sites.
Solar tracker drives, wind turbine yaw mechanisms, and biomass feed systems.
📚 Selection & Sizing Guide
Proper sizing prevents premature failure. Follow this simplified procedure to confirm the WPWDT suits your application:
Step 1: Calculate required output speed: n₂ = Motor Speed / Ratio
Step 2: Determine required output torque from your machine design.
Step 3: Apply service factor (fs) based on duty cycle, load type, and daily running hours.
Step 4: Verify M₂ × fs ≤ rated torque from the specification table above.
Step 5: Calculate motor power: P₁ = (M₂ × fs × n₂) / (9550 × η)
💡 Need help? Our engineering team provides free sizing assistance — contact us with your torque, speed, and application details.
🛠 Installation & Maintenance
☑ Mount on a flat, rigid surface with all foundation bolts properly torqued. ☑ Align motor and gearbox shafts within 0.5° angular and 0.05 mm parallel tolerance. ☑ Fill lubricant to the oil-gauge center line before first operation. ☑ Remove the breather vent plug to allow air circulation. ☑ Perform the first oil change after 100 operating hours, then every 2,500 hours thereafter. ☑ Maximum allowable oil temperature is 95°C — if exceeded, check load, alignment, and oil condition.
💧 Lubrication
Use synthetic PAG oil (ISO VG 460) for ambient temperatures 15–40°C, or ISO VG 320 for cooler environments. Recommended brands: Shell Tivela S, Mobil Glygoyle, or Esso Spartan EP series. Mineral oils are acceptable but result in higher operating temperatures and shorter change intervals. Fill to the sight-gauge center line.
🚧 Troubleshooting
| Symptom | Cause | Action |
|---|---|---|
| 🌡 Overheating | Overload / misalignment / low oil | Reduce load; re-align; check oil level |
| 📳 Vibration | Loose bolts / worn bearings | Re-torque fasteners; replace bearings |
| 🔈 Noise | Poor mesh / insufficient oil | Inspect gears; refill lubricant |
| 💧 Leakage | Worn seals / loose drain plug | Replace seals; tighten with sealant |
❓ Frequently Asked Questions
What materials are used in the gear set?
The worm wheel is precision-machined from CuSn12Ni2 tin-nickel bronze for exceptional wear resistance. The worm shaft is 20CrMnTi carburized alloy steel, ground to HRC 58-62 with Zi tooth profile for optimum meshing efficiency.
Can I mount this in any orientation?
Yes. Multiple mounting positions are supported including horizontal foot-mount, flange-mount, and vertical configurations. Ensure the oil level and breather are appropriate for your chosen orientation.
What is the typical service life?
Under rated conditions with proper lubrication and maintenance, service life regularly exceeds 20,000 operating hours. Bronze worm wheels exhibit gradual, predictable wear patterns rather than sudden failure.
How does efficiency vary with ratio?
Efficiency decreases as ratio increases. Low ratios (5-10:1) achieve 85-90%, medium ratios (20-30:1) achieve 68-82%, and high ratios (60-100:1) range from 44-60%. Select the lowest ratio that meets your speed requirement for best efficiency.
Can I combine two units for higher ratios?
Yes. Two units can be stacked in series for ratios up to 10,000:1. Alternatively, consider our double-reduction worm gearbox series which integrates both stages in a single housing.
⭐ Customer Feedback
⭐⭐⭐⭐⭐
“Quieter than our previous brand. Oil consumption is lower too. We’re standardizing on Ever-power across our plant.”
— David K., Maintenance Supervisor, Canada 🇨🇦
⭐⭐⭐⭐⭐
“The Zi tooth profile gives noticeably smoother engagement than the competitors we tested. Very low backlash.”
— Yuki T., Automation Specialist, Japan 🇯🇵
Start Your Worm Reducer Project Today
Whether you need one sample or 10,000 units, our team is ready to support your timeline and specification requirements.
Ever-power Australia Worm Reducer Co., Ltd. • About Us
