Description
NMRV Single Phase Gear Motor — Single-phase capacitor-run motor with NMRV worm reducer for 220V applications
Engineered for automated production lines and conveyor-driven logistics, the NMRV Single Phase Gear Motor from Ever-power Australia Worm Reducer Co., Ltd. delivers dependable speed reduction with integrated motor and gearbox as a single compact drive unit. Trusted by OEMs and system integrators across 60+ countries.
📜 NMRV Single Phase Gear Motor Product Overview
The NMRV Single Phase Gear Motor is a precision-built worm gear speed reducer designed for reliable right-angle power transmission in demanding industrial environments. Featuring integrated motor and gearbox as a single compact drive unit, this unit transforms high-speed motor rotation into controlled, high-torque output suitable for automated production lines and conveyor-driven logistics. The worm gear mechanism provides inherently smooth, low-vibration operation with significantly lower noise levels than spur or helical gear alternatives — typically below 65 dB(A) at rated load.
All gear components are manufactured under ISO 9001-certified quality management. The worm wheel is machined from wear-resistant bronze alloy, while the worm shaft undergoes carburizing and precision grinding to achieve a hardened tooth surface. This material combination ensures gradual, predictable wear characteristics rather than sudden failure, giving maintenance teams confidence in planning scheduled interventions.
✅ Key Features & Benefits
Ground worm shaft with Zi tooth profile ensures optimal contact geometry, reducing wear and maximizing transmission efficiency.
90° shaft arrangement saves space in tight machine envelopes compared to inline reducers of equivalent torque capacity.
A single gearbox covers a broad ratio spectrum, simplifying inventory management across multiple machine designs.
High-quality radial ball bearings support both shafts, providing excellent load capacity and minimizing axial play.
🔧 Technical Specifications
| Parameter | Value |
|---|---|
| Configuration | NMRV + Single-Phase Motor |
| Motor Type | Three-phase / Single-phase / Brake |
| Voltage | 220V/380V/415V (customizable) |
| Frequency | 50Hz / 60Hz |
| Insulation Class | Class F |
| Motor Protection | IP55 |
| Reducer Type | NMRV Aluminum Alloy |
| Ratio Range | 5:1 – 100:1 |
| Mounting | B3, B5, B6, B7, B8, V5, V6 |
| Wiring | Terminal box, CCW/CW selectable |
🏭 Application Industries
Pumps, fans, agitators, and small machine tools across multiple industries.
Stone cutting, brick molding, and concrete mixing equipment for construction sites.
Solar tracker drives, wind turbine yaw mechanisms, and biomass feed systems.
📚 Selection & Sizing Guide
Proper sizing prevents premature failure. Follow this simplified procedure to confirm the NMRV Single Phase Gear Motor suits your application:
Step 1: Calculate required output speed: n₂ = Motor Speed / Ratio
Step 2: Determine required output torque from your machine design.
Step 3: Apply service factor (fs) based on duty cycle, load type, and daily running hours.
Step 4: Verify M₂ × fs ≤ rated torque from the specification table above.
Step 5: Calculate motor power: P₁ = (M₂ × fs × n₂) / (9550 × η)
💡 Need help? Our engineering team provides free sizing assistance — contact us with your torque, speed, and application details.
🛠 Installation & Maintenance
☑ Mount on a flat, rigid surface with all foundation bolts properly torqued. ☑ Align motor and gearbox shafts within 0.5° angular and 0.05 mm parallel tolerance. ☑ Fill lubricant to the oil-gauge center line before first operation. ☑ Remove the breather vent plug to allow air circulation. ☑ Perform the first oil change after 100 operating hours, then every 2,500 hours thereafter. ☑ Maximum allowable oil temperature is 95°C — if exceeded, check load, alignment, and oil condition.
💧 Lubrication
Use synthetic PAG oil (ISO VG 460) for ambient temperatures 15–40°C, or ISO VG 320 for cooler environments. Recommended brands: Shell Tivela S, Mobil Glygoyle, or Esso Spartan EP series. Mineral oils are acceptable but result in higher operating temperatures and shorter change intervals. Fill to the sight-gauge center line.
🚧 Troubleshooting
| Symptom | Cause | Action |
|---|---|---|
| 🌡 Overheating | Overload / misalignment / low oil | Reduce load; re-align; check oil level |
| 📳 Vibration | Loose bolts / worn bearings | Re-torque fasteners; replace bearings |
| 🔈 Noise | Poor mesh / insufficient oil | Inspect gears; refill lubricant |
| 💧 Leakage | Worn seals / loose drain plug | Replace seals; tighten with sealant |
❓ Frequently Asked Questions
What materials are used in the gear set?
The worm wheel is precision-machined from CuSn12Ni2 tin-nickel bronze for exceptional wear resistance. The worm shaft is 20CrMnTi carburized alloy steel, ground to HRC 58-62 with Zi tooth profile for optimum meshing efficiency.
Can I mount this in any orientation?
Yes. Multiple mounting positions are supported including horizontal foot-mount, flange-mount, and vertical configurations. Ensure the oil level and breather are appropriate for your chosen orientation.
What is the typical service life?
Under rated conditions with proper lubrication and maintenance, service life regularly exceeds 20,000 operating hours. Bronze worm wheels exhibit gradual, predictable wear patterns rather than sudden failure.
How does efficiency vary with ratio?
Efficiency decreases as ratio increases. Low ratios (5-10:1) achieve 85-90%, medium ratios (20-30:1) achieve 68-82%, and high ratios (60-100:1) range from 44-60%. Select the lowest ratio that meets your speed requirement for best efficiency.
Can I combine two units for higher ratios?
Yes. Two units can be stacked in series for ratios up to 10,000:1. Alternatively, consider our double-reduction worm gearbox series which integrates both stages in a single housing.
⭐ Customer Feedback
⭐⭐⭐⭐⭐
“We run these on our bottling conveyors — over 18 months, zero failures. Excellent weight-to-torque ratio.”
— James T., Plant Manager, Australia 🇦🇺
⭐⭐⭐⭐⭐
“Outstanding quality consistency across large batches. Our OEM customers have had zero warranty claims.”
— Li Wei, Factory Director, Singapore 🇸🇬
Ready to Specify This Reducer?
Our engineers help you confirm sizing, select the right ratio, and match motor flanges. Get a competitive quote within 24 hours.
Ever-power Australia Worm Reducer Co., Ltd. • About Us
