Description
NMRV063 — Aluminum Alloy Worm Gearbox | 63mm Center Distance | Up to 180 Nm
Engineered for material handling and warehouse automation, the NMRV063 from Ever-power Australia Worm Reducer Co., Ltd. delivers dependable speed reduction with die-cast aluminum alloy housing with ribbed fins. Trusted by OEMs and system integrators across 60+ countries.
📜 NMRV063 Product Overview
The NMRV063 is a precision-built worm gear speed reducer designed for reliable right-angle power transmission in demanding industrial environments. Featuring die-cast aluminum alloy housing with ribbed fins, this unit transforms high-speed motor rotation into controlled, high-torque output suitable for material handling and warehouse automation. The worm gear mechanism provides inherently smooth, low-vibration operation with significantly lower noise levels than spur or helical gear alternatives — typically below 65 dB(A) at rated load.
All gear components are manufactured under ISO 9001-certified quality management. The worm wheel is machined from wear-resistant bronze alloy, while the worm shaft undergoes carburizing and precision grinding to achieve a hardened tooth surface. This material combination ensures gradual, predictable wear characteristics rather than sudden failure, giving maintenance teams confidence in planning scheduled interventions.
✅ Key Features & Benefits
The aluminum alloy housing with optimized fin geometry ensures efficient thermal dissipation during continuous duty cycles.
At higher ratios, the unit provides reliable self-locking — the load cannot back-drive the output, eliminating external brakes in many applications.
Input interface accepts both IEC metric and NEMA imperial motor flanges, providing worldwide sourcing flexibility.
Oil-bath lubrication, double-lip oil seals, and corrosion-resistant finishes minimize maintenance intervals and downtime costs.
🔧 Technical Specifications
| Parameter | Value |
|---|---|
| Center Distance | 63 mm |
| Reduction Ratio | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Max Output Torque | 180 Nm |
| Input Power Range | Up to 0.75 kW |
| Output Speed Range | 14–280 r/min |
| Housing | Die-cast Aluminum Alloy |
| Worm Wheel | CuSn12Ni2 Tin-Nickel Bronze |
| Worm Shaft | 20CrMnTi Steel, HRC 58-62, Zi Profile |
| Motor Flanges | 63B14, 71B14, 80B14, 90B14 |
| Protection | IP55 |
| Mounting | B3, B5, B6, B7, B8, V5, V6 |
| Weight | ~6.5 kg |
| Noise | < 65 dB(A) |
| Ambient Temp | -10°C to +40°C |
🏭 Application Industries
Belt conveyors, roller tables, and screw feeders for distribution centers and processing plants.
Cartoning, shrink-wrapping, and filling lines demanding smooth, jerk-free speed reduction.
Rotary indexing, pick-and-place modules, and AGV wheel drives in smart factories.
📚 Selection & Sizing Guide
Proper sizing prevents premature failure. Follow this simplified procedure to confirm the NMRV063 suits your application:
Step 1: Calculate required output speed: n₂ = Motor Speed / Ratio
Step 2: Determine required output torque from your machine design.
Step 3: Apply service factor (fs) based on duty cycle, load type, and daily running hours.
Step 4: Verify M₂ × fs ≤ rated torque from the specification table above.
Step 5: Calculate motor power: P₁ = (M₂ × fs × n₂) / (9550 × η)
💡 Need help? Our engineering team provides free sizing assistance — contact us with your torque, speed, and application details.
🛠 Installation & Maintenance
☑ Mount on a flat, rigid surface with all foundation bolts properly torqued. ☑ Align motor and gearbox shafts within 0.5° angular and 0.05 mm parallel tolerance. ☑ Fill lubricant to the oil-gauge center line before first operation. ☑ Remove the breather vent plug to allow air circulation. ☑ Perform the first oil change after 100 operating hours, then every 2,500 hours thereafter. ☑ Maximum allowable oil temperature is 95°C — if exceeded, check load, alignment, and oil condition.
💧 Lubrication
Use synthetic PAG oil (ISO VG 460) for ambient temperatures 15–40°C, or ISO VG 320 for cooler environments. Recommended brands: Shell Tivela S, Mobil Glygoyle, or Esso Spartan EP series. Mineral oils are acceptable but result in higher operating temperatures and shorter change intervals. Fill to the sight-gauge center line.
🚧 Troubleshooting
| Symptom | Cause | Action |
|---|---|---|
| 🌡 Overheating | Overload / misalignment / low oil | Reduce load; re-align; check oil level |
| 📳 Vibration | Loose bolts / worn bearings | Re-torque fasteners; replace bearings |
| 🔈 Noise | Poor mesh / insufficient oil | Inspect gears; refill lubricant |
| 💧 Leakage | Worn seals / loose drain plug | Replace seals; tighten with sealant |
❓ Frequently Asked Questions
How do I select the correct size?
Determine your required output torque and speed, apply the service factor for your duty cycle, then verify against the rated torque table. Our engineering team can assist — contact us for free sizing support.
Can this unit handle bidirectional rotation?
Yes. The gearbox operates identically in both directions with no preferred rotation. Simply reverse the motor wiring. Note that at self-locking ratios, reversal must be initiated from the input side.
What is the maximum operating temperature?
The oil temperature should not exceed 95°C. The aluminum housing provides efficient heat dissipation. If ambient temperature exceeds 40°C, derate the torque or add supplemental cooling.
How noisy is this worm gearbox?
Under rated load, noise is typically below 65 dB(A). Worm gears are inherently quieter than spur or helical gears due to their sliding contact. Synthetic lubricant further reduces noise.
Does Ever-power provide technical support?
Absolutely. Our application engineers provide free sizing calculations, CAD drawings, and motor-matching guidance. Email us your requirements for prompt assistance.
⭐ Customer Feedback
⭐⭐⭐⭐⭐
“Quieter than our previous brand. Oil consumption is lower too. We’re standardizing on Ever-power across our plant.”
— David K., Maintenance Supervisor, Canada 🇨🇦
⭐⭐⭐⭐⭐
“The Zi tooth profile gives noticeably smoother engagement than the competitors we tested. Very low backlash.”
— Yuki T., Automation Specialist, Japan 🇯🇵
Start Your Worm Reducer Project Today
Whether you need one sample or 10,000 units, our team is ready to support your timeline and specification requirements.
Ever-power Australia Worm Reducer Co., Ltd. • About Us
