helical worm gear motor
Helical-worm gearmotors
Due to their style and from being combined with a helical equipment stage, the helical-worm gearmotors S..DR.. have especially high efficiency. Also, they are extremely low-noise and therefore avoid high sound emission levels.
Low-noise continuous operation: equipment unit combination optimized with respect to efficiency
Do you anticipate a drive remedy to impress you with its high level of performance and efficiency? If so, we would recommend our high-quality helical-worm gearmotors EP to you. These could be implemented individually in the modular system. In this manner, they offer you a massive range of sizes, equipment ratios and engine sizes.
However, their greatest power is definitely their running smoothness and their incredibly low noise development. A very important factor is for certain – With the helical-worm gearmotors EP you opting for a robust drive solution that you will hardly even hear.
The overall concept offers you a lot more practical product characteristics and benefits. Included in these are the significantly higher efficiency of the helical-worm combinations as opposed to single helical-worm gear devices. This is one way you save additional energy in the procedure of your systems and are able to noticeably decrease ongoing operating costs.
You will have the low-noise helical-worm gearmotors EP. – to suit your individual requirements – with a wide variety of AC motors. Furthermore, you can freely configure all the relevant properties. In this manner, you can effectively make use of all the benefits provided by this mixture of low-noise helical-worm gear unit and performance-optimized electric motor. Even greater variance may be accomplished thanks to the optional flange or foot-mounted design and by choosing between solid and hollow shaft.
Save time and money
By opting for one of our gearmotors, you are already saving time and money with this selection and task planning. This is because our modular system allows a multitude of mixture options for gear systems and motors. You can therefore reduce operating costs, count on a long service life and benefit from simplified maintenance that’s feature of our brand.
Helical-worm gear units
Helical-worm combinations with considerably better efficiency than solitary helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm gear units of series EP
AC motors
Combine the helical-worm gear unit with this AC motors:
Characteristics
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm wheel provide exceptional toughness and long service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant light weight aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Available in footed, shaft install or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear products are helical/helical-worm combinations, so they are more efficient than normal helical-worm equipment units. Due to their outstanding performance, these drives can be used in every commercial sector and tailored to individual torque and speed requirements. The reduction ratios afforded by the helical-worm gear stage and the reduced noise levels during operation make these gearmotors ideal low-cost solutions for basic applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique mixture of optimized worm wheel materials with special lubricants, optimized shape, this powerful electric motor achieves high degrees of performance and torque. The housing machined on all sides enables diverse mounting options. Dual chamber shaft seals are utilized as standard.
The low contour design helps it be ideal for implementing applications e.g. in the meals industry. The housing does not have any recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and ground worm gears: Provides higher efficiencies and greater torque capability in smaller sizes.
Multiple Input Options: Integral gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft installation, inch and metric result shafts, mounting pilots and flanges provide an array of design solutions.
UNIBLOCK Housing: For maximum rigidity universal installation on five sides or via a torque arm.
Sealed for Washdown: Retains contaminants and water away.
Worldwide Engine: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or forced cooling.
EP equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors arranged new criteria for reliability, efficiency and economic climate with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration at this point and a future proof remedy. The EP gear engine offers total versatility in mounting options includes shaft, base, encounter, and flange solutions. The engine terminal box could be mounted in choice positions rotated in 90º steps around the electric motor frame providing for unparalleled integration options.
EP gear motors adhere to UNITED STATES and International criteria, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a true total answer for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series can be dirt tight and hose proof,and can be used outdoors or in wet and dusty conditions without the utilization of additional enclosures. Complete rated output is offered by the result shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Because of the unique combination of optimized worm wheel material with particular lubricants and optimized shape, this powerful geared electric motor achieves high degrees of effectiveness and torque. The reduced contour design helps it be ideal for implementing applications electronic.g. in the food industry. The housing has no recesses, which simplifies cleaning – an especially essential feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a broad selection of compact, durable helical gear drives with long life performance features and simplified maintenance. The usage of state of the artwork helical and worm equipment combinations affords optimum efficiency fulfilling a multitude of ratio requirements. The 800 BR is definitely functionally interchangeable with many major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All models shipped pre-lubed for your unique mounting position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and direct input
Projecting and hollow output shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Obtainable in hollow or projecting output shafts
Double and triple reduction ratios
Flanged or foot mounted
All models adaptable to flooring, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient compact right-angle geared motor. A favorably priced option for the standard duties expected of a right-angle drive.
5 equipment sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors offered with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC electric motor are directly flange mounted, the pinion is upon the electric motor shaft. This integrated small design can be an essential factor for the high precision and the amazing stiffness of EP geared motors.
For vector-controlled inverter procedure usage of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are made from case hardened alloy steel and the flanks are precision ground. The worm tires are made from special wear-resistant bronze. Helical worm gears are equipped with a helical equipment. Worm gears with shrink disc, torque limiter, as well as adjustable backlash designs are also component of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Overall efficiency gearboxes in universal design. The housings are produced from high quality cast iron. The rugget wall space and internal ribbing ensure incredibly torsional stiff and sound dampening housings. The exterior ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with tough walls and internal ribbing
Severe torsional resistance and low noise
Case hardened worm shafts and worms with precision ground flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available because solid shaft or hollow shaft
Shrink disc, torque limiter,along with adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG

If you would love to understand even more concerning helical worm gear motor, call us or merely see us at our web site.